Aviation Coming Eventually

Last updated November 8th, 2022!?  Time sure gets away from you sometimes, doesn't it. Woof..  A lot of time was spend figuring out main landing gear legs. The first step was taking the info from the Piper drawings and laying out the gear v's full size on my table, then jigging the parts in place.  This is what we're building. The left side of the picture would be facing the front of the aircraft.   And here's the jig laid out on my table. The nearer jig sets the relationship between the forward tube and the axle. The farther jig aligns the forward and rear tube as well as the bushings on which the gear leg will pivot. With the jigs laid out it's time to manufacture parts. First came the pivot bushings, and they were a bit of a process. First the little U-shaped piece of metal that holds the bushing needs to get bent to shape. I made a little die the right size to bend the material in my vice. After the U is bent it then gets a notch ground out to fit around the