Aviation Coming Eventually

I don't feel like going into depth on every little aspect of work I've done over the last 10 months, so I'll hit the highlights and if anyone has questions, feel free to comment and I'll elaborate.  As the year started the garage was cold. With a propane heater it would get warm enough to work for a few hours, but because 4130 steel is an air-tempered alloy, it needs to be sufficiently warm out for welding. Long story short; I can't weld, so I make parts. I plugged away making little bits so I can use them when it comes time to build a new assembly. The landing gear legs and spring struts have metal straps to reinforce the bushings in the ends. I knocked these out in a couple days after work. Likewise, the tabs that will become door hinges and the fittings for the tailwheel were cut, drilled, and deburred. As it warmed up and I got an order of laser-cut parts the aileron control arm and pulley brackets were welded to the torque tube for the control stick.  I also cu